• USER GUIDE. • Welcome Registering the system Thank you for choosing the new Datatool S4 Alarm ® system for your motorcycle. The system provides many unique features designed to increase the protection In order to activate the provided warranty cover for your of your machine or to customise its operation to meet new alarm system, please either return the completed your individual requirements. • Your remote control All S4 systems come supplied with 2 remote controls as standard. It is possible to add up to 4 extra remote controls (6 in total). ![]() Battery Change with Datatool System 4 - BIG. Checked the manual for the System 4. I had a datatool system 3 that would intermittently and randomly. The picture below show the type of transmitter supplied with your alarm. • Changing your remote control battery Each remote control contains a single long-life lithium battery (CR1616). This battery will normally last at least 12 months. Normal range for the remote control is around 10 metres. As the battery within the remote control comes to the end of its life, you will notice a reduction in its range and the battery should be replaced. • FULL passive arming arms the immobiliser and ignition trigger only. Of both the alarm and immobiliser (except on the S4 Green model) 45 seconds after turning off the ignition. If you wish to make the alarm fully arm passively you. • The system will still have immobilised the machine coded into the system. This ensures you will always (except with S4 Green model) and the alarm will react know you are in possession of all remote controls if the machine is hot-wired, the supply to the alarm capable of operating your system. English songs free download mp3. • The system will arm or disarm for this one operation and only flash the indicators. All S4 Alarm systems store the last five triggers NOTE: The inclusion of the arm and disarm indication within their memory. This can only be accessed by an beeps is strictly forbidden in all EU countries. • Switching Point 9.8 Volts extended period with the alarm armed we recommend the use of a battery conditioner (such as the Datatool • The LED is switched off (does not flash). Smart Charger) to maintain the battery charge level. • We would again advise you on the benefits of using the conjunction with a Thatcham approved ground anchor. Datatool Smart Charger to maintain the condition of your battery during extended stand up periods. NOTE: The machine’s battery will still naturally NOTE: Scorpion Automotive Ltd. • The PIN override system digit of the required PIN and turn the ignition OFF All Datatool S4 Alarms have a PIN disarming feature. ® As a new product there is no PIN number programmed and ON. Into the alarm, therefore we strongly recommend you 8. • Entering a new PIN code To initialise the PIN number the following procedure should be followed: Ignition Ignition Ignition Ignition Ignition ON within 5 secs Press both buttons LED on bike simultaneously within 10 seconds flashes rapidly confirmation beep 3 secs for 3 seconds ONE LONG TONE Repeat procedure to confirm new PIN. • Disarming the system with your PIN If the transmitter is lost or damaged, or the transmitter battery is flat, the system can be overridden by your If entered correctly, the alarm will disarm and the chosen four digit PIN (Personal identification Number) motorcycle indicators will flash once. • Enter the PIN number as previously described.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
March 2019
Categories |